Before learning to read speed, know how to measure the reading rate

Various studies describe how long reading is at work. Usually it is about 2 hours a day or about 24% of working hours. Increasing reading rates can be a boost in productivity.

What you recommend adds, what you emphasize increases. Before attempting to improve reading speed, it is wise to first measure your starting speed. Most people can not even try to guess how fast they read, but others rate the rate too slow like typing speed, like 80 or 90 words per minute (wpm).

Here's an easy way to calculate your rate with your own reading. While there are online online reading tests, they usually give you the result, without allowing you to track and measure your reading rate at any time in any kind of reading.

What You Need

– Book – Paperback or Hardback Size Book (for easy billing). Make sure it's easy to read fiction or non-fiction.

– Countdown timer – Countdown timer, stopwatch, clock or watch with seconds.

– Pocket calculator

– Two paper screws or notebooks or pencils to mark the starting and ending points

Instructions

] 1. Define starting point

Ignore any preface, foreword, or introduction and start in Chapter 1 of the book. Insert a paper screw or sticker or pencil to indicate your starting point.

2. Read for 3 minutes.

When you're ready, start your time and resign for 3 minutes for a good understanding, it's good sense and pleasure. Hold 3 minutes to read and put a pencil or paper clip or character table to specify your endpoint.

3. Check Remember

To check your receipt, turn the book face down and spend 30 seconds by writing some comments on what you can remember. Better than, advise you to perform this reading test with a friend or colleague and replace a 30-second summary.

– Good

– Average

– Fair

– Below Par

4. Calculate reading ratio

Now calculate the reading rate in words per minute. To do this, count the total words read, then change the number of minutes spelled reading, follow the following steps:

a) Number of words on line

To calculate the average number of words on the line, The total word of three lines and divided by three. (Words must have two characters to count.) The usual outcome of the paperback is about 10 words on line. In the back yard there are 12 to 13 words on the line.

b) The number of lines read

Then sum the total number of lines you read. (Two rounding lines are considered as one line).

c) Calculate total order read

For the total words read, multiply the number of lines with the number of words on the line.

d) Words per minute

Divide the total words read by a number of minutes of Spanish reading.

Here is the formula:

___ Lines X Words per Line = _____Total Words 3 3 = _____ WPM

Results:

– If your reading rate is ranges from 200 to 300 WPM which is the average reading rate. Most read at this rate.

– If your train ratio is below 200 WPM, do you choose technical reading materials with extreme difficulty? This can reduce the train rate. Or do you often read technical or scientific content at slow speed so that all you read is at the same slow pace?

– If the train rate is over 400 WPM, it indicates that you are not affected by poor reading such as subconsciousness (hear every word in your head while you are reading), or read-back read words, most readers recall 50 or 60 times per page) or fix (read one word at a time with narrow focus).

– If your train rate exceeds 1000 WPM, congratulations; this is a great success. If you also evaluate your understanding and memory as outstanding to very good then you are faster.

Now that you know the current reading speed, the next step is to learn how to read faster.

SOURCE SBOBET

Leave a Reply

Your email address will not be published. Required fields are marked *